MultiMate is the ultimate all-in-one tablet for effective pool water care. MultiMate offers a unique combination of rapid basic pool water disinfection with high quality water for a longer period of time. Easy and efficient! MultiMate is virtually pH neutral and stabilised to prevent chlorine degradation from sunlight.
The tablet is divided into 3 phases: pink, white and blue. The pink part of the tablet consists of fast dissolving chlorine that shock disinfects the pool water, providing thorough disinfection each time you add a new tablet.
The white part of the tablet contains slow dissolving chlorine that has several functions. In other words, in addition to the disinfecting chlorine, the following treatment products are slowly added to the water: Flocking agent that assembles microscopic particles into larger units, which the filter system can then more easily capture; pH stabiliser that makes it easier to maintain an even pH level; and liquid hardness stabiliser that binds the water’s metalloids so that the water does not get discoloured by the likes of copper and iron in the water. It also prevents the precipitation of calcium and subsequent calcium deposits on the pool liner and equipment.
The blue part of the tablet efficiently prevents slippery, slimy deposits, thereby preventing unpleasant slippery slimy layer on the surface of the pool liner, bottom and equipment.
Dosage: Place MultiMate directly in the skimmer, using 1 tablet per 20,000 litres of pool water. Add a new tablet when there is about 10% left - usually after about 7 days. Always place tablets in a liquid chlorine dispenser or in the pool’s skimmer. We recommend testing the chlorine content and pH balance regularly, and keeping the content of free chlorine between 0.5 and 1.0 mg per litre. Healthy pool water has a pH value of between 7.0 and 7.4. A healthy water balance achieves the best use of water care products. The tablet cannot be used in conjunction with inline chlorinators or in liquid chlorine dispensers. To measure the chlorine and pH count, use SWIM & FUN test strips.
Take extra care to ensure that the concentration of the care products does not become too high in the water around the skimmer during periods when the circulation system is not in operation.
The content of chlorine stabiliser (cyanuric acid) in the pool water must not exceed 100 mg per litre. Note that chlorine consumption can vary depending on the temperature of the water, the frequency and duration of swimming, and the weather. Make sure chemicals do not get damp during storage. Store the product in its original packaging, out of the reach of children, in a frost-free place and protected from direct sunlight.
Healthy pool water has a pH value of between 7.0 and 7.4. To get the best use out of our water care products, make sure you maintain a healthy water balance. If the pH value of the pool water is not within this range, adjust it, using pH-Plus and pH-Minus, respectively.
Warning: Mixing different chlorine-based products can cause strong chemical reactions and is potentially explosive! Never mix with other chemical substances! Biocides should be used with caution. Read the label and instructions for use before using the product.
