Spa pH-Plus 1 kg

Use SPA pH-Plus granules to raise the pH value of the water when it is below 7.0. Healthy swimming water has a pH value of between 7.0 and 7.4. To get the best use out of our water care products, make sure you maintain a healthy water balance. When the pH value is too low, the water can be aggressive to metal pool components. If the pH value is below 7.0, raise it with pH-Plus. If the value is above 7.4, you must lower it with pH-Minus. Test the pH value of the water regularly using Swim & Fun Test Strips.

Use the lid as a measuring cup:
The lid of this product acts as a measuring cup, so you can easily and accurately measure the correct amount.

Dosage: 8 g SPA pH-Plus increases the pH value by 0.1 per 1000 litres of water. This corresponds to the line for 100 ml if you use the product lid as a measuring cup. Dissolve pH-Plus in a clean plastic container with a little water. First add water. Run the pump and distribute the solution along the edge of the hot tub Never mix with other chemicals!

SPA pH-Plus comes in a practical plastic container with a childproof lid. The container is made from 100% recycled plastic, which reduces resource consumption and supports a more sustainable handling of packaging.

Make sure chemicals do not get damp during storage. Store in original packaging, locked and out of the reach of children in a dry frost-free place away from direct sunlight.

WARNING

Sodium carbonate. Index-no.: 011-005-00-2 (CAS-no: 497-19-8 ECno: 207-838-8).

Causes serious eye irritation. (H319) Keep out of reach of children. Wear eye protection. If eye irritation persists: Get medical advice/attention.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

1 kg.