Swim & Fun

Winter Cushion 120 x 120 cm

1621
With a winter pillow under the cover you prevent the collection of destructive rain and melt water on top of the pool.
Material Plastic
Color Blue

Description

Snow and rainwater collects on top of the cover in winter, and can destroy both the cover and pool. When it is cold and wet outside, it is not the pool that you are thinking most about. It can therefore be hard to remember, to remove collected water and snow when the elements have been generous.

The Winter Cusion compensates for the extra pressure that will build over time on top of the cover.

By placing the inflated Winter Cusion under the cover, a flexible ”room” is created in the pool water and on the top of the cover that will accumulate the extra pressure, that could otherwise damage the pool wall, liner and cover.

Important! Only inflate the winter pillow 60% to 80% to allow for compression.

The pillow can be used in all pools up to 30,000 litres and is placed in the middle of the pool. If you have a bigger pool, we recommend that you use more than one pillow. This pillow is made from a strong PVC material and has solid hooks mounted in each corner so that it is easy to attach with cord.

Relevant accessories
In winter, you should use a lockable All-Season cover (for example art 2108). Remember also to protect the pool from damage caused by a built up of ice pressure with winter floaters (art. 1613), and to fit an ice protector in the skimmer (art. 1612). It is also a good idea to add a strong coating inhibitor to your pool water, so that it is also well protected over the winter (arts. 1790).

We recommend that you remove large amounts of snow due to the weight of the load.
0.4mm pvc